2026 Porsche 911 GT3 R Specs
Here are the technical specifications of the 2026 Porsche 911 GT3 R race car based on the 992 generation Porsche 911.
2026 Porsche 911 GT3 R Technical Specifications
Concept
- Single-seater customer race car
- Homologated for the FIA GT3 category
- Homologation basis: Porsche 911 GT3 (992 series)
Dimensions
- Length: 4,619 mm
- Front axle width: 2,039 mm
- Rear axle width: 2,050 mm
- Wheelbase: 2,507 mm
- Base weight: ca. 1,265 kg (depending of BoP classification)
Engine
- Type: Water-cooled six-cylinder boxer, rear-mounted
- Displacement: 4,194 cm3
- Stroke: 81.5 mm
- Bore 104.5 mm
- Max engine speed: 9,250 rpm
- Maximum output: ca. 416 kW (565 PS)
- Fourvalve technology
- Single throttle butterfly system
- Direct fuel injection
- Engine control unit: Bosch MS 6.6
- Dry sump lubrication with oil-water heat exchanger
- Single mass flywheel
- Race exhaust system with twin tailpipes and DMSB certified catalytic converter
- Fuel quality: Superplus unleaded to E25 (min. 98 octane) and appropriate eFuels
- Improved traction control including adjustable engine brake function
Transmission
- Porsche six-speed sequential constant-mesh gearbox
- Shift paddles on the steering wheel with electronic shift actuator
- Mechanical limited slip differential with adjustable preload system unit
- Three-plate carbon race clutch
- Wear optimized differential
Body
- Lightweight body featuring intelligent aluminium-steel composite design
- Mounting points for lifting device
- Removable rescue hatch in the roof
- Welded in roll cage
- Six-bolt carbon racing seat pursuant to FIA 8862-2009
- Six-point safety harness for use with HANS
- Longitudinally adjustable pedal assembly and adjustable steering column with steering angle senor
- Front cover with integrated quick-release fasteners, cooler exit-air duct and central air intake for cockpit ventilation
- Widened front bumper with spoiler lip
- Fenders with extensions and additional louvres on top for improved front axle aerodynamics
- Rear trim with integrated rain light in accordance with FIA
- Doors, carbon-fibre rear lid and rear wing
- Rear wing with “swan neck” mounts and 4 mm gurney flap
- Fully polycarbonate glazing with hard coating
- Heated windscreen
- Four-post air jack system
- Valve mounting points on either side
- 117-litre FT3 fuel cell in front of the car incl. modification parts for left-hand side fueling
- Completely closed underfloor with additional mounting point for rear underbody
- Side skirts including NACA-inlets for drive-shaft cooling
Interior
- Carbon-fibre interior trim
- Multifunctional carbon-fibre steering wheel with quick release coupling, shift paddles and illuminated push buttons
- Ergonomic digital touch panel with multi-color backlighting
- Safety nets (center and driver’s side) in accordance with latest FIA safety regulations
- Integrated CFK side impact protection
- Drivers’ seat with seat ventilation
- Fire extinguishing system with electronic release unit
Suspension
- Forged aluminium control arms and top mounts, stiffness optimised
- High-duty spherical bearings with dust protection
- Wheel hubs with central locking
- Fiveway adjustable racing shock absorbers, motorsport-specific valve design and blow-off function
- Suspension adjustment via shims
- Sword-type anti-roll bars adjustable on both sides
- Spring travel potentiometer
- Tyre pressure monitoring system
- Additional drive-shaft cooling independent of brake cooling to improve wear
- Cooling of power steering fluid with additional oil cooler in front of car
Front Axle
- Double wishbone front axle, adjustable ride height, camber and toe
- Electro-hydraulic power steering with additional fluid cooling for improving thermal behaviour of the power steering
- Improved kinematics to increase the anti-dive rate
Rear Axle
- Multilink rear suspension, adjustable ride height, camber and toe
- Wheel hub with ceramic wheel bearings
- Racing driveshaft with tripod flanges; additional drive-shaft cooling on the upright side independent of brake cooling to improve wear; guiding pins to ease mounting
- Improved kinematics to increase anti-squat rate
Brakes
- Type: Two independent brake circuits incorporating front and rear axle brake pressure sensors, driver adjustable brake-force distribution via brake balance system
- Racing brake pads
- Optimised brake ducting separate from ducting for drive-shaft cooling
- Brake temperature sensors
- Ergonomic brake pedal positioning for left and right foot braking
- Generation 5 racing ABS from Bosch with optimized control strategy
- Front callipers: Six-piston aluminum monobloc racing brake callipers
- Front brake discs: Internally vented multi-piece 390 mm x 35.7 mm steel brake discs
- Rear callipers: Four-piston aluminum monobloc racing brake callipers
- Rear brake discs: Internally ventilated multi-piece 370 mm x 32.1 mm steel brake discs
Wheels and Tyres
- Type: Single-piece centre-lock alloy rims
- Front wheels: 12.5 J x 18
- Front tyres: 30/68-18
- Rear wheels: 13.5 J x 18
- Rear tyres: 31/71-18
Electrical system
- Latest generation Cosworth electronic components
- Porsche Logger Unit
- Porsche power box
- 10.3-inch Porsche colour display with integrated Remote Logger Unit (RLU), data recording via USA stick
- Leakproof LiFePo4 battery 12V, 40 Ah in the passenger footwell
- 210 A alternator
- Digital touch panel with multi-colour backlighting
- Single-arm windscreen wiper with direct drive (intermittent and continuous)
- LED headlights with integrated auxiliary lights
- LED taillights plus rain light
- Attachments for Accident Data Recorder (ADR)

Image by Porsche
